Stronger Than The Factory Control Arm Improved Suspension Geometry Provides Additional Built In Positive Caster Which Improves Your Handling Ability Complete Factory Replacement With No Modifications Required To Install Control Arms Ball Joints Are Included The upper control arms have a helical stamped coil mount with an integral shock mount. The lower shock mount is incorporated into the stamped coil plate. The upper control arms are preassembled on new billet chromolly 4130 cross shafts and pivot sleeves. CPP created a safety feature with an interlocking shaft and sleeve design that prevents the bolts from working loose even under severe stress created by hard corning. The CPP exclusive pivot bushings are a patented self lubricating plastic that will not squeak, and has a working temperature of over 400 degrees. These plastic bushings refuse to break during impact testing and can absorb high shocks loads that would otherwise be transferred thru the chassis
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
