Your shopping cart is empty!
DRIVEN BY CARE
-
My Account Sign In / Register
×
Select Your Vehicle to Shop for the Correct Parts:
Show More Filters
OER® was established in the early 1980's to manufacture original equipment reproductions where every part is meticulously reproduced to exact factory specifications. All OER® parts are reverse engineered or manufactured using original blueprints when available to ensure the closest possible reproduction available on the market. When available, original factory tooling is utilized to insure complete originality. Our mission is to supply the highest quality parts available for the enthusiast and serious restorer. Whether you're a serious restorer, or just someone who wants a replacement part for your classic vehicle, OER® is the source for the finest quality parts on the market. Today, OER® is the most recognized brand in automotive restoration parts. Choose OER® for all your restoration needs.
Many OER® products are officially licensed by General Motors and the Chrysler Group ensuring the quality and authenticity of these products. The GM Restoration Parts logo and the MOPAR Authentic Restoration Product logo are the true signs of quality. OER® is licensed by GM and the Chrysler Group as an official restoration parts manufacturer.
1-36 of 2823 results for OER : All Productsgo
Sort by
Show
Show results for
Refine By
Availability
On Sale
Condition
Price
Under $10 (238)$10 to $25 (449)$25 to $50 (526)$50 to $100 (371)$100 to $250 (481)$250 to $500 (464)$500 & Above (294)
$ to $ go
Manufacturer
Show Less Filters
Model: 3446653
Condition: NEW
These die-cast, ribbed, door lock knobs are heavy-duty die-cast reproductions of the original ribbed style door lock knobs found on a wide variety of GM models from 1968-90 including (but not limited to) the models listed below. Each set…
Model: 2029686
Condition: NEW
This is a very good reproduction of the original grommets used to mount the wiper motor to the firewall on various GM models.
This reproduction includes the original type steel sleeve built directly into the grommet. Sold as a set of…
Model: 2038028
Condition: NEW
Utilize this Mirror Mounting kit to help mount a new mirror and replace a damaged or tarnished one. Mirrors are an important part of any vehicle for both the function and look. The kit is made to meet or exceed factory…
Model: 2038029
Condition: NEW
Mirror mounting kit contains the bracket, gasket, mirror to bracket and bracket to door screws.
…
Model: 2036218
Condition: NEW
OER® offers this complete rear leaf spring installation kit designed for use on 1970-81 various GM vehicles equipped with multi-leaf rear springs including 1970-81 Camaro and Firebird models. Each leaf spring installation set comes…
Model: 3052633
Condition: NEW
OER® reproduction "Anco style" wiper blades for various GM models. Features a stainless steel blade with correct rubber insert. Designed after the "Anco" brand blades of the period. For blade refills use # 17528B. Sold as a pair…
Model: 3447356
Condition: NEW
This is a correct reproduction brake pad for a variety of GM models equipped with manual transmissions and drum brakes. This pedal pad can be used for either the brake or clutch pedal on some models as appropriate.
Officially Licensed…
Model: 2030755
Condition: NEW
Highly detailed injection molded OER® reproduction of the original carpet firewall guard, far superior in construction to the previous vacuum formed part. Each reproduction guard is now more precise than ever! Features include correct…
Model: 3446657
Condition: NEW
This hose bracket set is designed to secure a pair of heater hoses to the inner fender skirt and the alternator bracket to prevent damage of the hoses and keep the engine compartment neat and tidy in appearance. Officially Licensed GM…
Model: 2036903
Condition: NEW
The subframe bushings are essential when rebuilding your Camaro front end. One of the fastest areas to wear out are the radiator support bushings.This kit includes all the correct bushings and heat treated bolts and washers to completely…
Model: 3444886
Condition: NEW
This is a correct reproduction of the original striker for use on the applications listed below. The door lock striker is installed on the door jamb for either the right or left hand door. 2 required per vehicle. Chevrolet/GMC…
Model: 3445035
Condition: NEW
Reproduction of the original triangular seat belt guidedesigned for use on 1977-81 GM models with bucket seats. This seat belt guide installs to the upper outer side of the bucket seat and allows the seat belt webbing pass through and…
Model: 2032545
Condition: NEW
Reproduced in the original tower style design. Includes all eight clamps needed to completely replace radiator and heater hose clamps.
Kit includes:
Two 2-1/16" upper radiator hose clamps
Two 2-5/16" lower radiator hos e…
Model: 2032569
Condition: NEW
Reproduction headliner bow mounting clips for 1967-69 models. These clips attach to the roof panel and support the outer headliner bows. …
Model: 2039856
Condition: NEW
Replacing the control arm bumper with this OER® reproduction bumper can help bring the suspension back to factory original condition and keep it from bottoming out. Sold individually. 2 required per vehicle. Applications: 1975-79…
Model: 2030164
Condition: NEW
Correct clutch housing/flywheel cover plate which is located on the back of the engine block and is used to cover the flywheel. For use on most big blocks and high-perf small blocks with a heavy duty clutch and a 11" bellhousing. Note…
Model: 3443450
Condition: NEW
OER® reproduction of the parking brake release handle that features the correct configuration, lettering and grain. Unlike the current GM service replacement part sold elsewhere, this reproduction handle is an exact duplicate of the…
Model: 3443529
Condition: NEW
Original style replacement outer door mirror for 1967 Camaro models manufactured in high quality zinc die-cast with excellent chrome finish. Originally designed for drivers door, mirror will fit and install on passenger side with same…
Model: 3446312
Condition: NEW
Correct clip for attaching fuel and brake lines to the frame on various GM models. This clip is made of galvanized steel and is designed to accept one 3/8" and one 1/4" steel fuel line or one steel brake line. Bolt hole is 3/8", bolt not…
Model: 1024653
Condition: NEW
OER® reproduction jar which holds the windshield washer fluid. This jar is for use on various GM vehicles. Note:Washer jar cap sold separately. Applications: 1967-69 Camaro 1963-70 Corvette 1962-69 Impala / full size 1964-72…
Model: 1003876
Condition: NEW
Correct reproduction of the original manual transmission clutch or brake pedal pad trim plate. For use with K981 clutch or brake pedal pad.
Officially Licensed GM Restoration Part®
Applications:
1967-77 Chevrolet Camaro…
Model: 3449127
Condition: NEW
OER reproduction of the interior door panel clip retainers designed for use on various GM models including 1967-81 Camaro and Firebird models. These injection molded rubber plugs are inserted into the door shell to secure the inner door…
Model: 3311417
Condition: NEW
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is unplated for use with painted…
Model: 2030601
Condition: NEW
This is a quality OER® reproduction nut which is used to mount the leaf spring front eye bracket.
Sold as a 6 piece kit.
Applications:
1973-74 Buick Apollo
1975-79 Buick Skylark
1967-81 Chevrolet Cam aro
1968-79…
Model: 3441544
Condition: NEW
Each kit contains all the correct bolts, washers and nuts used to mount the subframe body bushings. Replaces rusted, burred, stripped, or otherwise damaged originals. Excellent for use when replacing subframe bushings. This is a…
Model: 3100753
Condition: NEW
OER® Authorized reproduction of the original steering coupling joint for various models. This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler specifications:
Shaft size: 3/4" fine…
Model: 2032076
Condition: NEW
Reproduction windshield glass support for 1967-69 Camaro models is used to position and support the glass. Stamped galvanized steel with a rubber coated foot. Sold individually. Two required per car. …
Model: 3443918
Condition: NEW
Reproduction of the original GM turn signal switch cancelling cam/horn contact for tilt and non-tilt steering wheels. Reproduced to original factory specifications. Each cancelling cam/horn contact is designed to replace the original…
Model: 3089024
Condition: NEW
OER® offers this complete rear leaf spring installation kit designed for use on 1967-74 various GM vehicles equipped with multi-leaf rear springs including 1967-1969 Camaro and Firebird models. Each leaf spring installation set comes…
Model: 2029904
Condition: NEW
This high quality reproduction from OER® is an exact replica of the original grommet installed where the speedometer cable runs through the firewall on 1967-70 Camaro models. Measures 1-1/2" o.d with a 5/16" center hole. This is a c…
Model: 2029813
Condition: NEW
OER® reproduction of the original grommet and sleeve unit where the accelerator rod fits into linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will keep your throttle rod from…
Model: 2029048
Condition: NEW
Authentic reproduction of the inner rear view mirror bracket designed to replace the original bracket exactly. Each bracket replicated the original exactly including correct finish and fit. Inludes chrome plating and correct mounting…
Model: 2028837
Condition: NEW
Knob which allows seat to move forward and backward on the track. This knob attaches to the seat track mechanism adjustment arm. Each knob is manufactured in die cast zinc material and beautifully chrome plated to match the original OEM…
Model: 3445214
Condition: NEW
This tool is great for tucking headliner or upholstery material into tedious channels without damaging the material.
Headliner installation is almost never easy, but having the right tools can make it much easier. This tool helps you…
Model: 3101827
Condition: NEW
Reproduction of the round rubber floor pan plug used by General Motors on various models. Found in various locations on the floor pan, these plugs are manufactured as original. Sold individually. Note: O verall diameter 2" Fits 1-3/8"…
Model: 3444091
Condition: NEW
Reproduction of the rear axle bumper which attaches to the body and helps keeps the rear axle from bottoming out. Manufactured with hard rubber with molded in stud for mounting. Sold individually. 2 required per vehicle. Applicati ons…