Your 1967-1981 Camaro's J-nuts on the front leaf spring cup are constantly exposed to adverse weather conditions, meaning they usually end up so rusted that the spring mount bolts will strip out the threads on the bolt, or even break the…
This is a quality OER® reproduction nut which is used to mount the leaf spring front eye bracket.
Sold as a 6 piece kit.
Applications:
1973-74 Buick Apollo
1975-79 Buick Skylark
1967-81 Chevrolet Cam aro
1968-79…
OER® offers this complete rear leaf spring installation kit designed for use on 1967-74 various GM vehicles equipped with multi-leaf rear springs including 1967-1969 Camaro and Firebird models. Each leaf spring installation set comes…
Secure your suspension system with this Replacement Leaf Spring Front Eye Bushing Mounting Hardware. Designed to provide a snug fit, this hardware ensures proper installation and long-lasting performance.
This bolt passes through the…
Reproduction Of Original Helps Maintain Proper Ride Height Helps Maintain Proper Alignment Eliminates Unnecessary Wear On Tires And Suspension Parts Made In USA Original 1967, 1968, 1969 Camaro coil springs often become very weak and may…
Replace your cracked, shrunken or worn out shackle bushings and bring your rear suspension back to original factory ride specifications.
Set includes 8 bushings.
Note: No further discounts apply.
…
Stock Replacement Correct Black Oxide Plating Stronger Than Imported Reproductions 6 Hex Bolts With Captured Washer 6 J-Nuts per Set Great stock replacement for J-nuts & Bolts in the body of the Nova used to hold the front leaf spring…
If your car or truck needs a little lift in the front end consider the Mr. Gasket Rubber Coil Spring Spacer. Made from high density rubber, it increases spring height without compromising spring travel. This allows you to raise the front…
Reproduction of the original bushings located on the forward eye of the rear leaf spring. These bushings are a commonly forgotten replacement part that is required when properly rebuilding the rear suspension. 2 pair required.
…
Use this rubber coil-spring spacer to raise the height of your StreetGrip front suspension approximately 1″.
Sold Individually.
Amount of height will vary based on vehicle. The rubber coil-spring spacer is 3/8″…
Reproduction of Original Complete leaf spring installation kit for mono-leaf or multi-leaf springs. Kits include rear shackle kits, upper and lower spring pads, spring front eye bolts and nuts, front spring eye bracket bolts and clip nuts…
Replace your cracked, shrunken or worn out shackle bushings and bring your rear suspension back to original factory ride specifications. We recommend replacing both upper and lower bushings. Sold individually. 8 required per vehicle. …
Replace your cracked, shrunken or worn out shackle bushings and bring your rear suspension back to original factory ride specifications. We recommend replacing both upper and lower bushings. Sold individually. 8 required per vehicle. …
Reproduction of Original Front eye bracket bolt for 1968-79 Nova models. Slight cosmetic difference from factory but will fit and function correctly. 6 required per vehicle.
…
Available in a chrome plated or silver powder coated finished, QA1's 2.5" I.D. Coil Springs are offered in 6" to 14" free length. QA1's springs are strong, consistent and have a long life because they are made with the highest quality…
Reproduction of Original This is a quality reproduction nut which is used to mount the leaf spring front eye bracket. The nut will fit on virtually all Nova models from 1968-79. 6 required per vehicle.
…
Reproduction of Original Replace your cracked, shrunken or worn out shackle bushings and bring your rear suspension back to original factory ride specifications. 8 required per vehicle.
…
Fits 1.63" bodies
Used with 2 1/2" springs
For coil over shocks with 1.63" O.D. body. Use with 2-1/2" I.D. springs.
Overall length of threaded sleeve is 4"
Length of threaded area is 3-3/8"
O.D. is nearly 2"
I.D. is…
OER® offers this complete rear leaf spring installation kit designed for use on 1970-81 various GM vehicles equipped with multi-leaf rear springs including 1970-81 Camaro and Firebird models. Each leaf spring installation set comes…
Reproduction of the original bushings located on the forward eye of the rear leaf spring. This bushing is a commonly forgotten replacement part that is required when properly rebuilding the rear suspension. Sold individually. 2 required…
Replace the sagging leaf springs on your classic GM vehicle with this quality set produced by OER! These replacement rear leaf springs are designed to replace the original multi-leaf spring set while featuring a precise direct-fit and…
Our OE quality shackle sets are made from precision tooling, exactly like originals and exceed GM material specs. Manufactured by QS-9000 and ISO/TS16-944 certified OE suppliers. Plates are precision stamped from high grade medium carbon…
OER® offers this complete rear leaf spring installation kit designed for use on 1967-74 various GM vehicles equipped with multi-leaf rear springs including 1967-1969 Camaro and Firebird models. Each leaf spring installation set comes…
Original style replacement bolts and nuts designed for use on the rear spring front eye attachment for 1967-74 Camaro and Firebird models. Will fit and install same as original. Measures 1/2"-20 x 5".
…
Ensure secure and stable mounting of your rear spring eye brackets with this 6-piece bolt set, designed specifically for 1967-1981 GM cars. These factory-correct bolts provide a precise fit, supporting the proper alignment and…
Replace the sagging leaf springs on your classic with high quality reproductions manufactured exclusively for OER®! These reproduction rear leaf springs are designed for an exact, direct replacement of the originals.
Front eye bushings…
Reproduction of the original coil spring spacer designed for use with various GM models. This spacer is manufactured from durable EPDM rubber. Most Camaro models were equipped with two spacers. Fits between the lower control arm and the…
Original style replacement bolts and nuts designed for use on the rear spring front eye attachment for 1967-74 Camaro and Firebird models. Will fit and install same as original. Measures 1/2"-20 x 5". Sold in pairs. …
Adds a dramatic amount of performance and durability to any vehicle. For cars, trucks and SUVs. Helps the vehicle be in control - when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made…
Each pad is used to insulate the area between the spring and the mounting plate. Two upper pads and two lower pads are required on vehicles with leaf springs.
…
Reproduction OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Applications: 1973-74 Buick Apollo 1967-81 Chevrolet Camaro 1968-74 Chevrolet Chevy II/Nova 1955- 57 Chevrolet Tri-Five models 1973-74…
OER® offers this complete rear leaf spring installation kit designed for use on various 1967-79 GM vehicles equipped with mono-leaf rear springs including 1967-1969 Camaro and Firebird models. Each leaf spring installation set comes…
OE quality front rear leaf spring eye bushing. Manufactured by QS-9000/ISO/TS-16944 certified manufacturer to original factory appearance with OE or better quality materials. Each. From Classic Suspensions. Officially Licensed GM…
This is a molded rubber coil spring insulator that mounts between the coil spring and the frame. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring insulators were not original on all vehicles but can be…